5-70-30 and 6-70-30
- Height as listed
- 5-70-30: 27 inches / 68 cm; 6-70-30: 28 inches / 71 cm.
- Line wires and spacing
- Five and six line wires respectively; both rows list vertical-wire spacing 12 inches / 30 cm.
HFortune S-knot catalogue
Hebei Fortune Trade Co., Ltd. · Published contact location: Shijiazhuang, Hebei, China.
Compare the official square-deal / S-knot model labels with the drawing and documents an actual quotation needs. Catalogue statements are not independently verified product results.
Company and source record
The official company page describes Hebei Fortune Trade Co., Ltd. as a trading company. The contact source publishes Xicheng Building, Huaian West Road, Shijiazhuang, 050091, China. This establishes website attribution and a published contact region, not factory ownership, registration or the producer of an offered roll.
Reviewed sources: company, contact and Square Knot Fence catalogue. No independent registration, certificate, stock, supply qualification, delivered project or contact-receipt verification is recorded.
Read the listing method →Model labels and published dimensions
The product source explicitly names square-deal, S-knot and stiff-stay knot, describing separate wire at the horizontal/vertical intersections. Keep this catalogue classification separate from Fixed-Knot and RingLock; obtain the offered knot drawing rather than assuming equivalence.
13-122-5
- Separate catalogue row
- 13 line wires; vertical-wire spacing 2 inches / 5 cm; height 48 inches / 122 cm.
- Roll length
- 330 feet / 100 m is listed for these rows.
Wire and finish fields
- Gauge / diameter wording
- 14 Ga / 2.0 mm or 12.5 Ga / 2.5 mm. The note assigns 12.5 Ga / 2.5 mm selvedges to the former and 11 Ga / 2.8 mm selvedges to the latter.
- Tensile statement
- The catalogue lists 700–900 MPa for line and stay wire.
- Finish labels
- Commercial galvanizing, heavy galvanizing and zinc aluminium.
Documents an offer still needs
- Legal seller, actual producer, production address and responsibility for the catalogue/offer relationship.
- Current model, drawing revision, knot detail, controlling units, line/stay/selvedge diameters, spacing, height, roll length and tolerances.
- Material and coating standard/edition, agreed inspection criteria and model/lot-linked test records. Do not substitute certification captions for applicable documents.
- Net/gross mass, roll/reel format, packing dimensions and count, marks, packing list, quantities and dated quotation with delivery terms.
No long-life, impact-resistance, injury-prevention, compatibility or containment promise is adopted. These are procurement-document requirements, not documents already received. No installation or electrical operating instructions are provided.
Published contact paths
The official contact page publishes email info@hfortune.com, telephone +86 311 8385 8333 and Skype hebeifortune. These are source-listed channels, not receipt-tested contacts. No call, message or enquiry was sent.
Check the official contact page for the current responsible party. Platform contact is separate, for platform enquiries and evidence corrections; it is not a promise to forward an order. Existing procurement tools prepare local drafts, not automatic supplier messages.
Before comparing quotations
Is HFortune a verified factory?
No. The official company page describes a trading company. Registration, actual producer, factory ownership and responsibility for the current offer are not independently verified.
Are dimensions confirmed?
No. Catalogue model labels and paired units need a governing drawing, revision, controlling unit and tolerance. Stock, supply qualification and delivery dates are not verified.
Are knot names equivalent?
No. This source is recorded as square-deal / S-knot catalogue evidence. It is not automatically equivalent to Fixed-Knot or RingLock.